Product Description
Sine Sort PM Synchronous AC SERVO MOTOR 130ST-M Collection
Electrical Specifications:
Specification Model | 130ST-M 4571 |
130ST-M 5571 |
130ST-M 6571 |
130ST-M 7525 |
130ST-M 7720 |
130ST-M 10571 |
130ST-M 15015 |
130ST-M 15571 |
Rated CZPT (w) | 1047 | 1300 | 1571 | 1963 | 1613 | 2618 | 2356 | 3927 |
Rated Torque(N.m) | 4. | five. | six. | seven.5 | seven.seven | ten | 15. | 15. |
Max Torque(N.m) | 12. | 15. | eighteen. | 22.eight | 23.one | 30 | 39. | 39. |
Rated CZPT (r/min) | 2500 | 2500 | 2500 | 2500 | 2000 | 2500 | 1500 | 2500 |
Max CZPT (r/min) | 3000 | 3000 | 3000 | 3000 | 2500 | 3000 | 2000 | 3000 |
Rated Present(A) | 4. | five. | six. | seven.five | 6. | 10. | 9. | 15 |
Max Existing(A) | twelve | 15 | 18 | 22. | 18. | 30. | 27. | forty five |
Rotor Inertia(kg.cm²) | 11 | twelve | thirteen.three | eighteen.2 | eighteen.2 | 24 | 35 | 35 |
Bodyweight(kg) | six.one | seven.one | seven.6 | 8.4 | 8.5 | 10.8 | 14. | 14. |
Encoder | Incremental2500p/rev | |||||||
Security Course | IP65 | |||||||
Voltage | Three phases AC 220V(-fifteen%-+ten% )fifty/60Hz | |||||||
Manner of Operating | Continuous | |||||||
Insulation class | F | |||||||
Ambient temperature | 0-40°C(Not freeze),storage:-25-70°C(Not freeze) | |||||||
Ambient humidity | <80%RH(Non-condensation),storage:<90%RH(Non-condensation) | |||||||
Environmental situations | Indoor(Not immediately impacted by the sunlight,absent from corrosive gas and flamable content) | |||||||
Peak | <Elevation of 5000m | |||||||
Vibration | Axial:24.5m/S² Radial:forty nine m /S² |
Wiring Diagram:
Motor Line
No. | one | 2 | 3 | 4 |
Content | GND | U | V | W |
Encoder Line
No. | 1 | 2 | three | four | 5 | six | 7 | eight | nine | ten | eleven | twelve | 13 | 14 | 15 |
Content material | GND | VCC | A | B | Z | A’ | B’ | Z’ | U | V | W | U’ | V’ | W’ |
*Proven in the desk is the representative solution, It can be CZPT ized in accordance to the requirements of customers.
Servo motor set up Notices:
1. When put in/uninstall the coupling factors to the shaft, you should don’t rarely beat the shaft end to prevent the motor’s other encoder ruined
2. Striving to make the coupling shaft’s concentricity to be very best to increase the provider existence.
Application:
Bundle:
Certificates:
Transport:
These NEMA c-plane reducers are equipment energy, upkeep-free, and can be put in in any orientation with a slip fit “O” ring design. Available in lower to substantial reduction ratios, flange mount or base mount variations, correct angle or hollow shaft proper angle versions. Put in NEMA C-Encounter AC motors, brushless DC motors, and brushed DC motors. For 1/2 HP to 3 HP Motors NEMA 56C, 140TC, and 180TC Enter Flange Inline Helical Equipment Reducers Appropriate Angle Hypoid Equipment Reducers